Location: Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China -
Get Directions
In general, stainless steel sinks are a very common piece of furniture, but there are not many people who have properly installed stainless steel sinks. Today, Stainless Steel Sink Manufacturers will ... moreIn general, stainless steel sinks are a very common piece of furniture, but there are not many people who have properly installed stainless steel sinks. Today, Stainless Steel Sink Manufacturers will share the precautions for stainless steel sink installation:
1, before installation
First open the package, take out the tank and drain components, and check that the sink accessories are complete. Then, according to the opening method described above, the hole is opened, and it is also necessary to check whether the muffler block is degummed, and if it is degummed, it should be attached in time. Look at the seals on both sides of the adapter tube for missing, misaligned, damaged, etc., to avoid leakage after installation.
Second, when installing
In order to prevent accidental damage to the surface of the faucet when installing the angle valve, it is recommended to put the angle valve on the plastic bag cover and then operate it. When connecting the hot and cold water pipes, the way is to connect the hot water pipe to the left end and the cold water pipe to the right end. During the installation process, pay attention to the tightening force. If the force is too large, it will easily damage the thread, causing the screw to loosen. If it is too small, it may cause water leakage due to insufficient sealing. Therefore, after the sink is installed, be sure to carefully check the seal of the overflow hole and the filter basket.
Third, after installation
Always remember to test the water when the sink is installed. First, open the water seal cover of the water purifier, then raise the drain hose to keep it consistent with the sink mouth, then fill the sink with water to ensure that the drain is filled with water, wait for 3-5 minutes or so. Check for leaks at each joint. If it is found that there is water seepage, immediately rework and re-glue.
information about Stainless Steel Sink Manufacturers : https://www.afastainlesskb.com/product/stainless-steel-sink/ less
Loading ...